Apparatus for the Utilization of Radiant Energy

Radiant Energy with layman language

Matter at the microscopic level is "electricity", which is an atom that carries an electrical charge. Electron may not exist, and the atomic nucleus is a dielectric. Because when Thomson introduced the Electron theory, genius scientists did not accept the existence of this particle. But doctrines can be ignored, and we accept that, on a microscopic level, the nature of matter is electricity.

Experimental science shows that electrons (atoms) exist in vortex form. Mathematically describes this vortex phenomenon as "Larmor precession". On a broader view, these are galaxies also in the form of vortex motion:


There is a force that governs the activity of all whirlwinds (from the atom to the whole galaxy), which is the galaxy's motion with tremendous speed:

“There is something frightening about the universe when we consider that only our senses of sound and sight make it beautiful,” said Mr. Tesla as his furrowed brow indicated he is puzzled with its destiny. “Just think, the universe is darker than the darkest ink; colder than the coldest ice and more silent than a silent tomb, with all the bodies rushing through it at terrific speeds. What an awe-inspiring picture, isn't it? Yet it is our brain that gives merely a physical impression. Sight and sound are the only avenues through which we can perceive it all. Often I have wondered if there is a third sense which we have failed to discover. I'm afraid not,” - Nikola Tesla

Nature's mother made the galaxy move with tremendous speed.

From the smallest matter to the galaxy, which is what is seen, is formed by the condensation of an invisible substance, it is like nothingness, and it is called Ether. What we call "electricity" is only the potential of the dielectric tension in the Ether.

Frequency-based stimuli on the elastic body can occur with stronger oscillations, and are most intense when stimuli have resonant frequencies.

With the Ether dielectric elastic system, when stimulated into the connected system, this stimulus will generate "push" and "pull" between the two potentials: the earth and the sky. The stimulation is the interruption of static electricity - the potential between the earth and the sky. Mechanical or electronic devices may be used to do so. Conflicts, or reflections of dielectric from the earth and sky create a "Radiation" in the system. And the radiant energy comes from the interruption of stimulation with a certain frequency.

This is a device that produces Tesla's radiant energy:


Devices for interrupting and stimulating are mechanical devices, including:
The device d is shown composed of two very thin conducting plates t and t' which are free to move and placed very close to each other. The freedom of movement can be either through the flexibility of the plates or through the character of their support. To improve their action they should be enclosed in a housing which can have the air removed from it. The plates t and t' are connected in series in a working circuit which includes a suitable receiver, which in this example is shown as an electromagnet M, a moveable armature a, a spring b, and a ratchet wheel w, provided with a spring-pawl r, which is pivoted to armature a as illustrated. When the radiation falls on plate P, a current flows into the capacitor until its voltage causes the plates t and t' to be attracted together, closing the circuit and energising the magnet M, causing it to draw down the armature a and cause a partial rotation of the ratchet wheel w. When the current flow stops, the armature is retracted by the spring b, without, however, moving the wheel w. With the stoppage of the current, the plates t and t' cease to be attracted and separate, thus restoring the circuit to its original condition.

The creation of such an activation device required both classical technical expertise.

Currently, electronic engineers will use electronic components to replace that mechanical device. And this is how they do it:

Practical guide: Ancient Invention Generates Energy-On-Demand
The design includes:
  • Harnessing electricity from the Earth: Neither is Schumann Resonance, nor is it known by Electromagnetism. It's The Sea of Energy in Which the Earth Floats
  • Extracted from ordinary electricity by the method called “fractionation.”
  • Reverse Tesla coil - "Back to Back" mechanism
  • Combination of radiant energy and negative resistance to amplify electricity 

Thomas Henry Moray has also created a device that harnesses radiant energy based on the potential between the earth and the sky. Later, many other inventors also created different versions in the field of electronics. However, all are suppressed by the elite .... Science without a true owner has a scientific mind, but the owner of science is "capitalism" that wants to own technology.

Method of Utilizing Radiant Energy - Nikola Tesla

 It is well known that certain radiations such as those of ultra-violet light, cathodic, Roentgen rays, or the like possess the property of charging and discharging conductors of electricity, the discharge being particularly noticeable when the conductor upon which the rays impinge is negatively electrified. These radiations are generally considered to be ether vibrations of extremely small wave lengths, and in explanation of the phenomena noted it has been assumed by some authorities that they ionize or render conducting the atmosphere through which they are propagated. My own experiments and observations, however, lead me to conclusions more in accord with the theory heretofore advanced by me that sources of such radiant energy throw off with great velocity minute particles of matter which are strongly electrified, and therefore capable of charging an electrical conductor, even if not so, may at any rate discharge an electrified conductor either by carrying off bodily its charge or otherwise.

My present application is based upon a discovery which I have made that when rays or radiations of the above kind are permitted to fall upon an insulated conducting-body connected to one of the terminals of a condenser while the other terminal of the same is made by independent means to receive or to carry away electricity a current flows into the condenser so long as the insulated body is exposed to the rays, and under the conditions hereinafter-specified an indefinite accumulation of electrical energy in the condenser takes place. This energy after a suitable time interval, during which the rays are allowed to act, may manifest itself in a powerful discharge, which maybe utilized for the operation or control of mechanical or electrical devices or rendered useful in many other ways.

In applying my discovery I provide a condenser, preferably of considerable electrostatic capacity, and connect one of its terminals to an insulated metal plate or other conducting-body exposed to the rays or streams of radiant matter.

It is very important, particularly in view of the fact that electrical energy is generally supplied at a very slow rate to the condenser, to construct the same I use, by preference, the best quality of mica as dielectric, taking every possible precaution in insulating the armatures, so that the instrument may withstand great electrical pressures without leaking and may leave no perceptible electrification when discharging instantaneously. In practice I have found that the best results are obtained with condensers treated in the manner described in a patent granted to me February 23,1897, No. 577,671. Obviously the above precautions should be the more rigorously observed the slower the rate of charging and the smaller the time interval during which the energy is allowed to accumulate in the condenser. The insulated plate or conducting-body should present as large a surface as practicable to the rays or streams of matter, having ascertained that the amount of energy conveyed to it per unit of time is under otherwise identical conditions proportionate to the area exposed, or nearly so. Furthermore, the surface should be clean and preferably highly polished or amalgamated. The second terminal or armature of the condenser may be connected to one of the poles to any conducting body or object whatever of such properties or so conditioned that by its means electricity of the required sign will be supplied to the terminal. A simple way of of a battery or other source of electricity generally convey a positive charge to the first condenser-terminal, which is connected to the plate or conductor above mentioned, I usually connect the second terminal of the condenser to the ground, this being the most convenient Way of obtaining negative electricity, dispensing with the necessity of providing an artificial source. In order to utilize for any useful purpose the energy accumulated in the condenser, I furthermore connect to the terminals of the same circuit including an instrument or apparatus which it is desired to operate and another instrument or device for alternately closing and opening the circuit. This latter may be any form of circuit-controller, with fixed or movable parts or electrodes, which may be actuated either by the stored energy or by independent means,

My discovery will be more fully understood from the following description and annexed drawings, to which reference is now made, and in which Figure 1 is a diagram showing the general arrangement of apparatus as usually employed. Fig. 2 is a similar diagram illustrating more in detail typical forms of the devices or elements used in practice, and Figs. 3 and are diagrammatical representations of modified arrangements suitable for special purposes.



As illustrative of the manner in which the several parts or elements of the apparatus in one of its simplest forms are to be arranged and connected for useful operation, reference is made to Fig. 1, in which 0 is the condenser, P the insulated plate or conducting-body which is exposed to the rays, and P another plate or conductor which is grounded, all being joined in series, as shown. The terminals T of the condenser are also connected to a circuit which includes a device R to be operated and a circuit-controlling device d of the character above referred to.

The apparatus being arranged as shown, it will be found that when the radiations of the sun or of any other source capable of producing the effects before described fall upon the plate P an accumulation of electrical energy in the condenser C will result. This phenomenon, I believe, is best explained as follows: The sun, as well as other sources of radiant energy, throws off minute particles of matter positively electrified,which,impinging upon the plate P, communicate continuously an electrical charge to the same. The opposite terminal of the condenser being connected to the ground, which may be considered as a vast reservoir of negative electricity, a feeble current flows continuously into the condenser, and inasmuch as these supposed particles are of an inconceivably small radius or curvature, and consequently charged to a relatively very high potential, this charging of the condenser may continue, as I have actually observed, almost indefinitely, even to the point of rupturing the dielectric. If the device be of such character that it will operate to close the circuit in which it is included when the potential in the condenser has reached a certain magnitude, the accumulated charge will pass through the circuit, which also includes the receiver R, and operate the latter.

In illustration of a particular form of apparatus which may be used in carrying out my discovery I now refer to Fig. 2. In this figure, which in the general arrangement of the elements is identical to Fig. 1, the device at is shown as composed of two very thin conducting-plates 2ft, placed in close proximity and very mobile, either by reason of extreme flexibility or owing to the character of their support. To improve their action,they should be inclosed in a receptacle, from which the air may be exhausted. The plates 25 are connected in series with a working circuit, including a suitable receiver, which in this case is shown as consisting of an electromagnet M, a movable armature a, a retractile spring, and a ratchet-wheel 10, provided with a spring-pawl 1 which is pivoted to armature a, as illustrated. When the radiations of the sun or other radiant source fall upon plate P, a current flows into the condenser, as above explained, until the potential therein rises sufficiently to attract and bring into contact the two plates 25 t, and thereby close the circuit connected to the two condenser-terminals. This permits a fiow of current which energizes the magnet M, causing it to draw down the armature a and impart a partial rotation to the ratchet-Wheel to. As the current ceases the armature is retracted by the spring, without, however, moving the wheel. With the stoppage of the current the plates t t cease to be attracted and separate, thus restoring the circuit to its original condition.

Fig. 3 shows a modified form of apparatus used in connection with an artificial source of radiant energy, which in this instance may be an arc emitting copiously ultra-violet rays. A suitable reflector may be provided for concentrating and directing the radiations. A magnet and circuit-controller d are arranged as in the previous figures; but in the present case the former instead of performing itself the whole work only serves the purpose of alternately opening and closing a local circuit, containing a source of current B and a receiving or translating device D. The controller, if desired, may consist of two fixed electrodes separated by a minute air gap or weak dielectric film, which breaks down more or less suddenly when a definite difference of potential is reached at the terminals of the condenser and returns to its original state upon the passage of the discharge.

Still another modification is shown in Fig. 4, in which the source S of radiant energy is a special form of Roentgen tube, having but one terminal 70, generally of aluminium, in the form of half a sphere,with a plain polished surface on the front side, from which the streams are thrown off. It may be excited by attaching it to one of the terminals of any generator of sufficiently high electromotive force; but whatever apparatus be used it is important that the tube be exhausted to a high degree, as otherwise it might prove entirely ineffective. The working or discharge circuit connected to the terminals T T of the condenser includes in this case the primary 19 of a transformer and a circuit controller comprising a fixed terminal or brush t and a movable terminal 25 in the shape of a wheel, with conducting and insulating segments, which may be rotated at an arbitrary speed by any suitable means. In inductive relation to the primary wire or coil 19 is a secondary s, usually of a much greater number of turns, to the ends of which is connected a receiver R. The terminals of the condenser being connected, as indicated, one to an insulated plate P and the other to a grounded plate P, when the tube S is excited rays or streams of matter are emitted from the same, which convey a positive charge to the plate P and condenser-terminal T, while terminal T is continuously receiving negative electricity from the plate P. This, as before explained, results in an accumulation of electrical energy in the condenser, which goes on as long as the circuit including the cult is closed owing to the rotation of the terminal t, the stored energy is discharged through the primary 19, this giving rise in the energy, comprising in combination, a condenser, secondaries to induced currents, which oper ate the receiver R.

It is clear from what has been stated above that if the terminal T is connected to a plate supplying positive instead of negative electricity the rays should convey negative electricity to plate P. The source S maybe any form of Roentgen or Lenard tube; but it is theory of action that in order to be very effective the electrical impulses exciting it should be wholly or at least preponderately of one sign. If ordinary symmetrical alternating currents are employed, provision should be made for allowing the rays to fall upon the plate P only during those periods when they are productive of the desired result. Evidently if the radiations of the source be stopped or intercepted or their intensity varied in any manner,as by periodically interrupting or rhythmically varying the current exciting the source, there will be corresponding changes in the action upon the receiver R, and thus signals may be transmitted and will respond to or be set in operation when a predetermined amount of energy is stored in the condenser may be used in lieu of the device specifically described with reference to Fig. 2.

Related: "Broadcast Power" Nikola Tesla

Σχόλια